NEWS CENTER

Dezhou MISON Cooling And Heating Technology Co.,Ltd.

Instructions for the precautions for the use of wall -mounted manufacturers on wall -mounted boilers

Published:

2022-09-23

Wall -mounted boiler manufacturers said that users should check whether the boiler's water pressure meter pointer should be within the specified range before use. The standards specified in the manual performed the water pressure to 1-1.2Bar, but in the process of using the management process in China, there are some air due to the heating system and boiler. When the boiler is running, the air in the system is continuously discharged from the exhaust valve of the boiler, and the pressure of the boiler will fall irregularly; during winter heating, the water heating in the heating system expands and the water pressure in the system rises. After the water is cooling, the pressure decreases again, which is normal.

Instructions for use

Keep water pressure

Experimental studies have shown that as long as the water pressure in the wall-mounted stove is basically kept between 0.5-1.5Bar, it can not produce normal use of wall-hanging boilers. If the water pressure is lower than 0.5bar, it may affect the hot water and heat of the hot water in social life or be unable to start through normal work. If the water pressure is higher than 1.5bar, the system pressure will rise when heating. If it exceeds 3BAR, the safety valve of the boiler will be released automatically. Water may affect unnecessary losses of enterprises. Under normal circumstances, it is enough to replenish water once to two months.

Special reminder of wall -mounted boiler manufacturers

After the system is full of water, the water supply switch of the boiler must be turned off. Owners who travel for a long time (more than 3 months) should close the total water supply valve. It is recommended to install a drainage outlet on the boiler safety valve to avoid unnecessary losses when the boiler's water pressure is too high. Note: Gas is a special industry. If you need to dismantle the pipeline or gas system, please come to the door for maintenance services.

Wall -mounted boiler manufacturers emphasize safety instructions for safety

1. To ensure that the suction and exhaust systems of boiler smoke pipes in my country are unobstructed. The tobacco pipe structure of the wall -mounted boiler is a dual -core tube. When the boiler works, the fresh air is inhaled from the external tube, and the burning exhaust gas is discharged from the inner tube. During the combustion period, the amount of air inhaled by the boiler is about 40m2/h, so the amount of exhaust gas generated is very large. Therefore, when the owner closes a balcony or moving the machine, the smoke pipe's suction and rowing outlet design must be extended out of the window in time, and the sealing material shall not be performed indoors or using a single core tube. Back the exhaust gas back. Insufficient oxygen supply during the combustion process can easily lead to the explosion of the boiler, no ignition or frequently start, leaving hidden dangers for the safety of life and property. The material of the pipeline is also important: one is stainless steel and the other is aluminum. Stainless steel is safer due to its higher strength and stability.

2. When the wall -hung boiler work, the temperature requirements of heating, hot water outlet pipes, and cigarette pipe structures are high at the bottom. Touch strictly to avoid burns.

Note: The disassembly of the tobacco pipe is best operated by professional and technical personnel, so as to prevent the sealing requirements of the tobacco pipes is not strict and block, causing safety accidents.

Winter antifreeze

Wall -mounted boiler manufacturers can summarize the boiler for a long time, especially in winter. If the boiler or heater is filled with water, the boiler must be equipped with antifreeze and sufficient power and gas Frozen from other components of the boiler. The heating wall -hung boilers of each brand have anti -freezing function. For specific actual operation management methods, please refer to the design manual.

Note: After the anti -freezing function is set, it is necessary to ensure that the water, electricity, and gas are sufficient in home. In order to prevent accidents, after setting antifreeze, regular inspection of the water pressure and working development of the boiler should be performed to ensure all national security. The temperature of the anti -freezing agent is enabled and disabled by the manufacturer.

Keyword:

Wall -mounted boiler manufacturers

Wall -mounted boiler manufacturers introduce wall -hanging boiler types and installation precautions

Wall -mounted boiler manufacturers introduce the principle and harm of wall -hung furnace dirt

Wall -mounted boiler manufacturers introduce wall -hanging boiler types and installation precautions

Wall -mounted boiler manufacturers introduce the principle and harm of wall -hung furnace dirt